HMP™_TE Range Of Taper Pipe Couplings
OVERVIEW
The HMP™_TE Taper pipe coupling is a high pressure pipe coupling, designed as an easy method of joining pipes. Also commonly termed quick couplings for steel pipes, the HMP™_TE couplings are used in high pressure piping systems. It speeds up installation time drastically when compared to flanges. The HMP™_TE was re-engineered by the Hydromine Projects International to be interchangeable with the original Anglo American / TE taper pipe coupling.
Using the HMP™_TE coupling will result in lower total capital expenditure due to the fact that it has a lower procurement cost, more pipes can be loaded per truck or rail carriage load, it takes less space when stored and most importantly, there will be a saving on labour as installation is quicker and easier than flanges. It can be installed in vertical mine shafts, inclines or horizontally. The HMP™_TE coupling can be used in pipe lines carrying liquids or abrasive material and is perfect for mining backfill pipes. The HMP™ U-Coupling is newer technology and more cost effective than the HMP™_TE coupling.
The HMP™_TE pipe coupling can be installed in a system where pipes hang on chains, parrot swings or are U-Bolted down onto pipe supports. Pipes should be anchored before and after every change of direction. The full range of HMP™ valves, expansion joints and energy dissipator can be manufactured with HMP™_TE coupling end connections.
BOLT TORQUE SETTINGS
PARTS
MATERIALS OF CONSTRUCTION
DESIGN AND MANUFACTURING STANDARDS
The HMP™_TE Hydraulic coupling are designed in accordance with various international standards as set out below:
ASME Boilers and pressure vessels design code
ANSI B16.3
ANSI B16.34
ANSI N278.1
ANSI B16.37
Available sizes: DN50 / 2" to DN200 / 8"
Pressure rating: up to 25MPa / 3 626 psi
DOWNLOADS