Print

LFC™_3B Water Hydraulic Actuated Valves

LFC 3B Water Hydraulic Actuated Isolation ValveOVERVIEW

The LFC™_3B Water hydraulic actuated isolation valves is based on the same design as the LFC™_3B pressure regulating valve. Water hydraulic actuated valves are more cost effective than the LFC™_3B electrical actuated valves. The upstream water hydraulic power are used to actuate the LFC™_3B isolation valve. The speed of the valve can be adjusted to any desired speed fairly quickly and easily. The LFC™_3B Water hydraulic actuated isolation valve are generally used for remote isolation, level control or pump discharge control valves. Using line fluids removes the need for any gearboxes, electrical actuators or handwheels which makes them ideal for applications where tampering is a problem.

The LFC™_3B water hydraulic actuated valve has been developed to present a robust, simple and cost-effective low pressure (up to 2.5 MPa / 363Psi) solution to fluid handling issues in any industrial sector.

SIMPLICITY

The LFC™_3B Water hydraulic valve is designed to minimize wearing parts and in effect only has one moving part called the plug assembly. The plug assembly is a piston that is engineered to be unbalanced. The unbalanced plug uses the inline fluid pressure to remove the influence of differential pressure on operating torque. As such, the valve operating torque is the torque required to overcome the sum of the friction forces generated between the valve body, seals and the cylinder plus the weight of the plug (depending on the installation con figuration). This torque requirement is not affected by inline pressure variants and therefore makes these valves extremely good for actuation applications as well as for isolation valves where manual operation is required. Removal of gearboxes reduces maintenance requirements and improves troubleshooting times. The valve uses a water hydraulic control panels or solenoid valve to operate and it are simple in comparison with an electrical actuator. The LFC™_3B Water hydraulic valve can easily be fitted with limit switches to give open and closed indication. 

LOW OPERATING TORQUE

The LFC™_3B Water hydraulic isolation valves are hydrostatically un-balanced to enable easy opening and closing at any pressure and differential conditions. It does not require the use of a gearbox or a by-pass valve to balance pressure between the inlet and outlet. 

OPERATING CONDITIONS

These valves are designed to operate in systems with relatively clean media like water or other liquids with a low percentage of suspended solids and chlorides. The valve's operating pH range is 2 - 14 pH.

LOW MAINTENANCE REQUIREMENT

All the moving parts of LFC™_3B water hydraulic actuated valve are manufactured from stainless steel which increases reliability and durability. The LFC ™_3B requires minimal maintenance, the majority of which, can be conducted with the valve remaining in situ.

MATERIALS OF CONSTRUCTION & DIMENSIONS

LFC 3B Water Hydraulic Actuated Isolation Valve MC

FLOW RATES

LFC 3B Water Hydraulic Actuated Isolation Valve FR

VALVE SIZING

Please consult with Hydromine for clarification of correct sizing for your requirements.

LFC™_3B WATER HYDRAULIC ACTUATED VALVE WITH CONTROL PANEL AND LIMIT SWITCHES

LFC 3B Water Hydraulic Actuated Isolation Valve1

DESIGN AND MANUFACTURING STANDARDS

The HMP™ S-Range has been designed in accordance with various international standards as set out below:

ASME Boilers and pressure vessels design code
ANSI B16.10     ANSI B16.3
ANSI B16.34     ANSI B16.37
ANSI B16.5       ANSI N278.1

Available sizes: DN50 / 2" to DN400 / 16"
Face to face dimensions to ANSI B16.10
Pressure rating: up to 25MPa / 3 626 psi

Available end connections: ANSI B16.5, BS4504, BS10, AS/NZS 4331.1 (ISO 7005-1) DIN, All makes of grooved or ring joint couplings, HMP™ U-Coupling, HMP™-TE tapered couplings and other as per clients requirement.

DOWNLOADS

Product Brochure